CNC Machining

As regards CNC machining, with the use of ten CNC lathes (or rather turning centres) our company is ready to provide precise machining of rotating parts, both simple in shape and complex-shaped parts, employing high range of milling procedures, or by drilling inclined holes. In addition to all this, we mainly work stainless and less machinable materials. We are equipped to machine pieces of up to 65 mm in diameter from part material, hexagon bar of up to 55 mm and for diameters of up to 180 mm we use blanks. Now we’ve also introduced production machining of pieces with the use of semi-finished parts

Our experience with machined materials:

  • Stainless steel: 1.4301, 1.4305, 1.4306, 1.4404, 1.4435, 1.4541, 1.4547, 1.4571
  • Automatic and cutting-tool steel: 1.0718, 1.0036, 1,0122, 1.2312, etc.
  • Aluminium alloys: AW2007, AW2030, AW5083, AW6063, AW6082, AW7075
  • Bronze alloys: CuSn8
  • Plastic materials: PTFE, PTFE GF15, PE UHMW, PVDF, PEEK, PA6.6 polyamide, POM-C,
  • Brass alloys: CW614, CW-713R, ECOBRASS
  • High-alloy steels: MONEL 400, HASTELLOY C-4, HASTELLOY C-22

As to our experience we only work with certified materials originating in the EU provided by our trusted suppliers.

We are able to cooperatively arrange the machine parts finishing such as zinc coating, or chemical heat treatment such as anodic oxidation, annealing, nitriding, etc.

Nakamura-Tome WT-100 Nakamura-Tome WT-150 Nakamura-Tome WY-250 Supermill Nakamura-tome AS-200L
Takamaz XL-100      
(C) Tradeko, s.r.o. All rights reserved
edited by n.e.s.p.i